Haas Repair on Mono Optimizer
A short left-right delay sounds wide in stereo and combs in mono. Haas repair is the switch for that case, and it stays off until you need it.
A Haas widen is a short delay between left and right. In stereo it reads as space. In a mono fold it combs: the vocal thins, the snare hollows, a guitar that was pleasant in headphones turns nasal on a phone. Haas repair on Mono Optimizer is the switch for that case.
Leave it off unless you hear that problem. It is not a polish knob, and it is not how Rescue works. The guide keeps it off in the first check on purpose.
Hear the comb before you flip the switch
- Put Mono Optimizer last on the bus or on the track that was widened with a few milliseconds.
- Leave Rescue and Image up. Leave Haas repair off. Limit stays on.
- Click Mono. If the tone scoops and the pitch of the scoop moves when you nudge the delay in the widener, you are hearing a comb.
- Click Lost. A Haas problem often shows up as a tonal residue, not as a quiet wash of reverb.
- Turn Haas repair on and listen in Mono again.
The factory preset Haas Fix is Rescue high and Haas repair on. It is a starting point for width that came from a short delay, not a preset for every dull mono fold. A polarity flip and a very wide low end are different causes. They want Rescue and Image. They do not want this switch just because mono sounds bad.
Do not stack a repair on a repair you still need
If the widen is a send you can turn down, turn it down and see if the comb leaves. Haas repair is for the print you cannot unwind: a stereo file, a committed effect, a sample that arrived late on one side. The product demos include a drum loop with the right side a few milliseconds late, mono before and after the repair. That is the shape of the problem.
Rescue still matters. Haas repair does not replace it. A track can have a short delay and a polarity issue. Listen in Mono with the switch off, then on, and watch Loss and Saved. If Saved does not move and the comb remains, the thing you are hearing may not be a short delay.
Image after the comb is gone
Once the mono vocal is solid, set Image for how wide the stereo picture should stay. Full keeps more of the original width around the repair. Toward zero centres it. Broadcast Mono in the factory list is the centred, limiter-on end of that trade. Club Safe keeps more picture. Neither of those presets is a reason to leave Haas repair on.
The plugin reports its delay. Leave plugin delay compensation on, including while you A/B with Optimizer bypass. Bypass is there so the comparison happens at the same delay. A bypass that shifts the track will sound "better" for the wrong reason.
Keep exploring
See the tools behind these workflows.