Which Duality Engine Should Come First?
Dual runs Benzonizer and Ma'afinator in series. The arrow sets the order. Bigger-then-broken is the default. Broken-then-bigger is the flip.
Dual on Paraflex Duality is both engines in series, not a crossfade between two memories. The arrow is the order. A new Dual starts as Benzonizer → Ma'afinator. The signal is made bigger and denser, then broken. Crush and Drop chew on a sound that is already loud and wide.
Flip the arrow and Ma'afinator goes first. Grit, clip, and gaps happen to the dry signal. Benzonizer then puts saturation, lift, and glue on what survived. The guide shows the arrow in both directions. This is how to choose.
Bigger, then broken
Use the default when the source is thin and you want the damage to have something to bite.
- A small vocal that should get body from Saturate and Inflate, then a little Crush so it does not sound polite.
- A drum bus that can take glue first and a short Drop only on a fill.
- Anything where Inflate's width should exist before the gaps. Remember that width follows the Benzonizer Mix. If you then crush hard, some of that width becomes grit. That can be the point.
Watch the gain-reduction number on the way through. If Compress is working and Ma'afinator is after it, Drop and Distort are hitting a more even signal. The gaps land on a controlled level. That is usually easier to sit in a mix than gaps on a wild transient.
Broken, then bigger
Flip the arrow when the damage is the identity and the second engine is repair.
- Crush first, then a little Saturate, so the stepped tone gets a softer harmonic without losing the stair-step.
- Distort first, then Compress, so the clip is the sound and the glue stops it poking out of the track.
- Drop first only if you want the holes themselves made warmer. Benzonizer will not fill a gap with dry signal. The hole is already there. It will colour the edges and the audio that remains.
If the second engine makes the damage too polite, lower Benzonizer's Mix. You still have the order. You have less of the repair.
Presets do not move the arrow for you
Both Worlds turns Dual on, sets both mixes, and adds a taste of Crush, Distort, Compress, and Saturate. It also sets the order: Ma'afinator first. Look at the arrow after you load a preset. Listening without looking is how a session ends up with the opposite flow from the one you named.
Single mode is still there. One engine, the other out of the path. Dual is a choice you make when one engine is not the whole job. Two instances of Duality in series are a different topology, with two Mix stages and two chances to add nothing useful. One instance and the arrow is the smaller version of that experiment.
Delta solos the whole plugin's change, whichever order you picked. If you cannot tell which engine is first, bypass is the wrong tool. Look at the arrow.
Duality · Guide · Benzonizer
Keep exploring
See the tools behind these workflows.