Journal
Alchemysynthesissound designbassVoid

Void Tones in Alchemy

The six Void rows under the periodic table are low-noise tones. They do not react. Use them for weight under a bright element.

Paraflex Audio

Under the periodic table in Paraflex Alchemy there is a last row: Void-Alpha, Void-Beta, Void-Gamma, Void-Delta, Void-Epsilon, and Void-Zeta. They are low-noise tones. They are not elements, and they do not take part in the chemistry.

The guide says this in one paragraph. It is easy to miss, and it is the cleanest way to add weight under a bright chamber without starting another reaction.

What they refuse to do

Void elements do not react with anything, including each other. No bond, no legend line, no Geiger from a radioactive neighbour's reaction attached to the Void itself. An actinide in the same chamber can still decay on its own. The Void just sits under it as tone.

The cell shows no atomic number. Colour is still a family swatch so you can see the orb. The pitch is on the cell, the same as any other voice you can load. You still only get six occupants in the chamber. A Void uses one of those six.

How to add weight

  1. Load the bright element you already like. Hydrogen and oxygen, a metal, a preset from Waveforms.
  2. Add one Void.
  3. Scroll its volume carefully. Low noise eats headroom. A Void at full under a bright lead will own the meter and dull the thing you came for.
  4. Leave the Reactor wherever the other elements need it. The Void will not get louder because a bond got stronger.

In Keys pitch the Void follows the note, with its own detune, and fills under the chord. In Alchemy pitch it keeps the pitch on its cell, transposed with the blue reference key, which is often the more useful bass: a low tone that does not chase every chord tone.

Filters and the noise

Tone is after the elements: low cut, high cut, resonance, slope. A Void that feels like hiss wants the high cut. A Void that feels like mud wants the low cut up from 20 Hz toward somewhere that still leaves the weight. Resonance on that cut will whistle. Leave resonance down until the cut is in the right place.

Drive in Fold gets bright and loud, and it is oversampled. A Void into Fold is a harsh noise lead. Tube or Tape is the milder circuit if the Void is supposed to stay a foundation. Geiger on the Void is optional crackle you asked for. If the patch crackles with Geiger at zero, a radioactive element in the chamber is doing it. Read the legend.

When not to use one

If the patch is already six elements and the legend is the point, do not kick out a reacting pair to make room for noise. If you need sub from a sample, use the sample. Void is the tone inside this instrument when you want the chamber to stay the whole patch.

Alchemy · Guide · Water Formation

Keep exploring

See the tools behind these workflows.

Browse products